Phone:
021-64472383
BCT7915C
Over-Voltage Protection Load Switch
BCT7915C
Over-Voltage Protection Load Switch
GENERAL DESCRIPTION
The BCT7915C OVP load switch features surge protection, an internal clamp circuit protects the device from surge voltages up to 100V.
The BCT7915C features an ultra-low 30.7mΩ (Typ.) Rdson nFET load switch. When input voltage exceeds the OVP threshold, the switch is turned off very fast to prevent damage to the protected downstream devices. The IN pin is capable of withstanding fault voltages up to 29VDC.
The default OVP threshold is 6.8V, the OVP threshold can be adjusted from 4V to 20V through external OVLO pin.
The device features an open-drain output ACOK,when VIN_UVLO < VIN < VIN_OVLO and the switch is on,ACOK will be driven low to indicate a good power input, otherwise it is high impedance.
This device features over-temperature protection that prevents itself from thermal damaging.
The BCT7915C is available in a RoHS compliant 1.512mm × 1.072mm WLCSP-12L package.
APPLICATIONS
Smart Phones
Tablets
Charging Ports
FEATURES
Highly reliable 1.512mm × 1.072mm WLCSP-12L package.
Surge protection
IEC 61000-4-5: > 110V
Integrated low Rdson nFET switch: typical 30.7mΩ
4.5A continuous current capability
Default Over-Voltage Protection (OVP) threshold 6.8V
OVP threshold adjustable range: 4V to 20V
Input maximum voltage rating: 29VDC
Fast turn-off response: typical 50ns
Over-Temperature Protection (OTP)
Under-Voltage Lockout (UVLO)
ORDERING INFORMATION
Ordering Code | Voltage | Package Description | Temp Range | Top Marking | QTY/Reel |
BCT7915CEWC-TR | 6.8V | WLCSP-12L | –40°C to +85°C | LGQR XXX | 3000 |
Note:
1.LGQR" in Marking is product short code for BCT7915C EWCTR.
2."XXXX" in Marking will be appeared as the batch code.
