Phone:
021-64472383
BCT4302B
Dual SIM Card Controller
BCT4302B
Dual SIM Card Controller
GENERAL DESCRIPTION
TThe BCT4302B is a dual SIM card control chip optimized for GSM/EDGE/GPRS/3G handsets, It provides the power conversion and signal level translation needed for advanced cell phones to interface with 1.8V and 3V SIMs. The device meets all requirements for 1.8V and 3V SIMs and contains LDO regulators to power 1.8V or 3V SIM card from a 2.7V to 5.5V input. A serial port interface(SPI) is used to control dual SIM channel individually. The BCT4302B I/O voltage can support 1.65V to 5.5V.
The BCT4302B is available in 20-pin 3mm x 3mm QFN package. The operating temperature range is from -25°C to +85°C.
APPLICATIONS
Support dual SIM card interface
GSM, EDGE, GPRS and 3G Cell Phones
FEATURES
CMOS Technology for dual SIM card controlling
Control and communication through a SPI interface with baseband processor.
Power management and control for two SIM cards
Independent 1.8/3V VCC control for each SIM card
Fast channel switching
Independent clock stop mode (at high or low level) for each SIM card
Temperature Range: –25°C to 85°C
8KV ESD on SIM Card Pins
20-pin 3mm x 3mm QFN package (Pb-free & Green available):
ORDERING INFORMATION
Order Number | Package Type | Temperature Range | Marking | QTY/Reel |
| BCT4302BEGP-TR | QFN3x3-20L | -40°C to +85°C | XXXXX 4302B | 6000 |
Note 1: "XXXXX" in Marking will be appeared as the batch code.
